D-Link DWL-8200AP 802.11a/g Managed Dualband Access Point Firmware

D-Link DWL-8200AP 802.11a/g Managed Dualband Access Point Firmware 1.20 for Windows (all)

Do NOT upgrade firmware on any D-Link product over a wireless connection.

Failure of the device may result. Use only hard-wired network connections.

What's New:

Problem Resolved:

- Fixed: Can't edit the public community.

- Modified TX power table for 8200 according the table from PM

- Modified to support new Israel.

- No matter the SSID broadcast is enabled or disabled, the AP in WDS (WDS+AP as well) mode with WPA-PSK/WPA2-PSK should work properly(WDS can't connect when user disabled SSID Broadcast).

- Task dead(failed reboot, after apply setting) when change apmode from WDS to AP by D-View.

- User cann't get wdsclient info at each side, when reboot device on both side at the same time.

- When multi-state enable, and set ssid like "%*", ap will reboot continually.

- [WEB]"Domain Name" in DHCP, which set by AP Manager v1.20 can not display to the Web page.

- The Korea domain should not support turbo mode in 11g band.

Enhancements:

- WMM support for each SSID.

- RADIUS Accounting for each SSID.

- support SSID broadcast “enable/disable” for each SSID

- add Output power control for Korea.

- SMTP support in log setting.

- Configuration file extension from CFG to DCF.

- Change default SSID to “dlink”.

- Add command “get/set SNMP” to control snmp state.

- add 3 get power commands for MFG, they are “getswpower/controlpower/targetpower”

- Add fw upgrade protection policy.

- Support 64Bytes username length for radius authentication.

- Support 64 character WEB login username length.

- support Character Set of WEB login username, include "a~z", "A~Z", "0~9", "@", ".", "-" and "_".

- Pop error message when key in unsupported characters in WEB login user name

- Add Telnet command “Get PassPhrase” to display passphrase of wpa-psk

- Add Telnet command “Get RadiusSecret” to display Radius Secret

- add character filter for SSID, 0x20~0x7F(ASCII) set is supported.

- remove character filter for SSID setting.

- Modify the Korea channel to [36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 149, 153, 157, 161]

Download

System Requirements:

Windows (all)

Version:

1.20

Last updated:

2010-06-10 16:22:13

Publisher:

D-Link

Homepage:

File name:

dwl8200AP_firmware_120.tfp

File size:

1.69MB

License:

Freeware

Price:

0

You may also like...