HP Deskjet 6800 Series 12.2.0.0

Updated : 2010-07-04 17:34:07
Size : 0KB
Platform : Windows /
HP Deskjet 6800 Series Screenshot

WARNING: If you are using Windows 2000 with any firewall or Windows
XP with a 3rd party firewall you may experience the following 2
issues:
Note: Windows XP users with the built-in Internet Connection
Firewall may ignore this warning.
During the software installation, the HP Deskjet 6800 series
network installer fails to locate the printer on the network. The
error message, "Setup was unable to detect any printers on the
network" appears. To prevent this issue from occurring, you must
temporarily disable your firewall before you install the HP Deskjet
6800 series printer software.
Consult the documentation that came with your firewall for help in
disabling it. Some firewalls may require further configuration
after printer installation in order for the printer to be made
available on the network.
Whenever the firewall is disabled, HP strongly recommends that the
following items be installed on your computer:
A hardware device that provides firewall protection between the
Internet and your computer, such as a gateway
An up-to-date antivirus software program
For maximum virus protection while the firewall is disabled,
disconnect your router from the Internet. Once the printer is
installed, reconnect your router to the Internet.
Some computers have multiple network connections (such as one
connection for a local area network, and another connection for a
wireless network). Disable each network connection's firewall.
1. Set up printer hardware
1. Plug power cord into power adapter and power adapter into
printer. Plug power cord into outlet.
2. Turn printer on.
3. Load white paper.
4. Ensure output tray is lowered.
5. Open front cover
6. Pull pink tab to remove clear tape from print cartridges. Do not
touch copper strip.
7. Wait until cradle is idle. Insert print cartridges then close
latches.
8. Close front cover.
2. Connect to printer
If you are using Windows 2000 with any firewall or Windows XP with
a 3rd party firewall close all virus protection programs that are
running on the computer (see above warning).
1. For wireless install:
1. Verify power and wireless status lights are on.
2. Use the Ethernet cable (included in the box) to connect the
printer to the network hub, switch or router.
3. Verify Network light is on. If not, check cable connections.
4. Temporarily disable any third party firewall.
2. For Ethernet install:
1. Use the Ethernet cable (included in the box) to connect the
printer to the network hub, switch or router.
2. Verify Network light is on. If not, check cable connections.
3. For USB install:
Do not plug in USB cable until directed to do so by the
software.
3. Create a new folder on the hard drive before downloading the
printer driver.
1. Suggestion: "c:dj6800"
4. Download the driver to the newly created c:dj6800 folder.
5. Open the c:dj6800 folder and double-click on the downloaded
"exe" file. Once the files are loaded and driver installation
screen appears, proceed to step 8. Note: If this screen does not
appear, continue with the next step (step 6) to manually open the
screen.
6. Double-click on the c:dj6800 folder to open the folder.
7. Double-click on the "setup" file to start the installation
program.
8. Follow the instructions on the installer screens to complete the
installation.
9. After installation,
1. For wireless use, disconnect the Ethernet c