Albatron PX845GEV Bios

1.Add Hyper Threading message to detect HT support CPU.

2.Fixed System hang on POST while C5.

3.Enhance Overclocking ability.

Features:

Intel Pentium 4 Processor (Northwood)

Socket 478 with FSB 400/533/800 MHz

2 DDR266/333/400 Memory Sockets

6 Channel AC97 Audio

3Com 10/100 Ethernet LAN

2 ATA100 Channels, up to 4 ATA 100 IDE Devices

6 USB 2.0/1.1 Ports (4 ports by optional cable)

Processor

Socket 478 Intel Pentium 4 Processor (Northwood)

FSB / Transport

400/533/800 MHz

Chipset

North Bridge : Intel 848P

South Bridge : Intel ICH4

LAN Chip : 3Com 3C920

AC97 Audio Codec : Realtek ALC655

I/O Chip: Winbond Smart I/O W83627HF

Memory

2 DDR Sockets:

DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GB

Note 1: If the FSB of your CPU is 400 MHz, the memory speed

supports only DDR 266.

Note 2: If the FSB of your CPU is 533 MHz, the memory speed

supports DDR 266/333

Note 3: If the FSB of your CPU is 800 MHz, the memory speed

supports DDR 266/333/400

Expansion Slots

1 x AGP(3.0) 8X slot (1.5V only)

5 x PCI slots (PCI 2.3 compliant)

IDE / SATA Connectors

2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devices

Onboard I/O Connectors

1 x Floppy Connector

2 x USB 2.0/1.1 header (4 ports by optional cable)

1 x CD_IN header

1 x S/PDIF in/out header (S/PDIF in/out cable optional)

1 x CPU fan header ( 1 fan rotation detection function )

2 x System fan headers ( 2 fan rotation detection function )

2 x 5 pin system panel header (Intel spec)

1 x 3 pin Power LED header

1 x Front audio header (Intel spec)

1 x IrDA header

1 x Case Open detection header

I/O via Back Panel

PS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45, 2 x Com(serial), 1 x

Parallel, 1xLine-in/Line-out(Speaker Out)/MIC

Power

20-pin ATX power connector, 4-pin ATX 12V power connector

BIOS Feature

3Mb Flash EEPROM

Award BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM

(S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC

Timer

Hardware Monitoring

3 FAN sensors, CPU/System voltages and temperature monitoring

Special Feature

Zero Jumper Design

Watch Dog Timer (auto-reset system when it can not handle overclock

configurations)

AGP Protection (The AGP Protection can ensure the AGP card voltage

to be 1.5V, to protect the mainboard and the AGP card.)

Certifications

FCC, CE, BSMI

Form Factor

ATX (305mm x 200mm)

Do use the latest driver version available, it will help you use

the facilities of your hardware easier and better. An old version

can create hardware conflicts and errors in function. Try to stay

updated with your drivers monthly or sometimes weekly. Chose wisely

the specific drivers: motherboards driver, bios, graphic cards

drivers, modem drivers and so on. Chose the right driver for your

hardware and try to make backups of your system every time you want

to make a change.